Input Data:

- Maximum input power 2340 W

- Nominal DC voltage 400 V

- Maximum input voltage 500 VDC

- MPPT voltage range 150 V a 500 V ±5 %

- System start-up voltage 100 V ±5 %

- Working voltage range 100 V ±5 % ~ 500 V -5 % +0 % V

- Working voltage range 150 V ±5 %

- Range di funzionamento 200 V to 500 V

- Full rating working range 10 ADC

- Max. input current 80 V typical

- DC voltage ripple DC < 10%

- DC insulation resistance > 8M ohm

- DC Switch On/Off 20A

- DC Connector Tyco (1 pair)

- Attached DC connector Tyco (1 pair)

Output data:

- Nominal output power 2000 W

- Maximum output power 2200 W (limited to 10 mins @50 °C ambient)

- Operational voltage range 198 V (min), 256 V (max)

- Operational normal voltage 230 Vac

- Operational frequency range 50 Hz 47.5 < f50 < 50.2 per 50 Hz

- Nominal output current 8.7 A

- O/P current distortion THD <5%, each harmonics <3%

- Power factor > 0,99

- DC current injection < 0,5%

General Data:

- Internal power consumption < 7 W

- Standby power (at night) < 0.1 W

- Minimum conversion efficiency (DC/AC) > 90 %, under input voltage > 210 V, carico > 20%

- Maximum conversion efficiency (DC / AC) > 95%

- European efficiency > 94%

- GGFCI threshold See ground fault current detect

- Ground current detection range 0 ~ 500 mA

- Ground current detection frequency 0 ~ 700 Hz

- Protection degree IP65

- Operation temperature da -25 °C a 55 °C

- Humidity 0 to 95 %, non-condensing

- Heat dissipation Convection

- Acoustic noise level < 40 dB, A-weighted, frequency up to 20 kHz

- Altitude up to 3000 m without power derating 5 °C derated for each additional 500 m

- Dimension (mm) 352 x 300 x 133 (product) / 460 x 460 x 265 (packaging)

- Weight (net/gross) 14 kg (product) / 16 kg (packaging)

- Certification DK 5940